ELEGOO High Temp Tape, 4 Pack Polyimide High Temperature Resistant Tape
9 sold in last 24 hours
- Four Full Rolls, Four Useful Widths: Choose 1/8, 1/4, 1/2 or 1 in for fine component masking, wire organization or broader surface coverage; each roll is 108 ft long, giving electronics benches, repair workstations and maker spaces 432 ft in total
- HN Polyimide Polymers Film For High-Heat Work: The 0.05 mm total tape thickness is rated from -73°C to 260°C for temporary masking and insulation around soldering, hot-air rework, wave soldering, powder coating and other controlled heat-exposure tasks
- Silicone Adhesive Balances Hold & Release: Apply the tape to a clean, dry, smooth surface and press firmly for full contact; the silicone adhesive is designed to hold during temporary masking and release cleanly after the work cools, while delicate or painted finishes should be spot-tested first
- Mask, Insulate & Organize Projects: Shield nearby PCB components during soldering or hot-air rework, cover solder joints, separate conductive surfaces, secure lightweight wire runs, mask selected areas during 3D-printer maintenance, or protect details during powder coating and heat-transfer work
- Know What This Tape Is Not: This is single-sided polyimide film tape, not double-sided thermal interface tape, thermal paste, PTFE thread tape, polyester film tape, foil tape or structural mounting adhesive; do not use it as a permanent load-bearing fastener
Estimated shipping
Select a product to estimate shipping.ELEGOO 4-Pack Polyimide High-Temperature Tape are made from polyimide film with silicone adhesive. They are compatible with a wide temperature range as low as - 73 °C (-99 °F) and as high as 260 °C (500 °F).
For applications where extremes of heat and vibration are the norm, designers rely on it because of its ability to maintain its unique combination of mechanical properties under the harshest of conditions.
Applications:
Automotive sensor and manifolds
Insulating circuit boards
Etching
Fiber Optics Cable
High temperature powder coating
Semiconductor manufacturing
Wave soldering during circuit board assembly
3D Printing
Heat Transfer Printing
ELEGOO Polyimide High Temperature Resistant Tape (4 Rolls × 108 ft, 432 ft Total)
Specification:
Backing Material: Polyimide Polymers Film
Adhesive Type: Silicone
Substrate Material Thickness: 0.025 mm
Thickness with Adhesive: 0.05 mm
Adhesive Strength: 4.5 N/ 25 mm
Tensile Strength: 135 N/ 25 mm
Elongation: 35 %
Temperature Range:-73°C – 260°C (-99°F - 500°F)
Length: 108 feet for each roll, 432 feet in total
Assortment of 4 Sizes High Temp Tape
Multi-sized high temp tape makes it much easier to wrap sensitive things. No need for doubling up on narrow tape or trimming tape that is too wide. Just grab the right size roll and go.
Silicone Adhesive for Clean Removal
The silicone adhesive is designed to hold during temporary high-temperature masking and release cleanly from compatible surfaces after use
Heat-Resistant Polyimide Film
Polyimide film helps shield nearby components and surfaces during soldering and hot-air rework
Wide Range of Applications
From insulating circuit boards to high-temperature powder coating, you can use ELEGOO high temp tape in all your projects that involve high-temperature environments
Package List
1/8 inch high temp tape with 108 feet
1/4 inch high temp tape with 108 feet
1/2 inch high temp tape with 108 feet
1 inch high temp tape with 108 feet
Product details
| Main Specification | |
|---|---|
| Beállítás | 1 hüvelyk or 1/8 inch or 1/4 inch or 1/2 inch |
| Ajánlott felhasználások termékhez | Elektromos or Soldering or electrical insulation and splicing wires or masking circuit boards |
| Anyag | Szilikon or Polyimide |
| Gyártó | ELEGOO |
| Egységszám | 432 Lábak |
| Felszíni ajánlás | Sima felületek |
| Szakítószilárdság | 135 newtons_per_square_millimeter |
| Kompatibilis anyag | Fém |
| Márka | ELEGOO |
| Tételek száma | 4 |
| Vízellenállási szint | Vízállóság |
| Tételvastagság | 0,05 mm |
| Felső hőmérséklet-értékelés | 260 ° C |
| Színes | Barna |
| Különleges jellemzők | Nincs maradvány |
| Elem súlya | 0, 13 kg |
| Product information | |
| Csomagok száma | 4 |
| Technical Details | |
| Anyagtípus | Szilikon or Polyimide |
| Elem-ellenállás | Nedvesség ellenáll or Hőálló anyag or Kémiai ellenanyag |
| Részszám | EL-CP-022 |
| Minta | EL-CP-022 |
| Ragasztóforma | Keskeny szalag |
| Ragadós oldalsó gróf | 1 |
| Ragasztóhely | 1 _ oldal |
| Others | |
| Elem kiemelése | 1 / 2 " or Forrasztás or 1 / 4 " or Protect PCB Repair or Multi-Sized Value Bundle 1/8" or 1" with Silicone Adhesive for Masking |
| Terméktípus | High Temperature Tape |
| Az elem méretei L x W x vastagság | 1"L |
| A termék egyéb különleges jellemzői | Nincs maradvány |
| Méretnév | #0001 |
| Ragasztóanyag | Szilikon |
| Foil Theries | 0,05 mm |